Water Heaters Β· Installation Β· Repair Β· Replacement

Water Heater Installation Singapore

Need water heater installation in Singapore for a new home, a replacement or an upgrade from instant to storage? Our PUB licensed plumber and EMA-licensed electrical team install, repair and replace water heaters for HDB, condo and landed homes in one visit.

  • Instant & storage heaters
  • Plumbing + electrical
  • Repair & replacement
  • From S$160

Quick answer: Water heater installation in Singapore involves mounting the unit, connecting the cold and hot water pipes, and connecting it to a suitable electrical supply with the right switch and protection. Instant heaters typically cost S$160 to S$500 to install and suit single showers; storage heaters typically cost S$350 to S$600 and suit bathrooms with several outlets or rain showers. Because the job is both plumbing and electrical, use a team licensed for both. MM Engineering Works has a PUB licensed plumber and is a 1st Class EMA-licensed electrical contractor.

Water heater installation Singapore: how to choose between an instant and storage water heater
Four questions to help choose the right water heater.
Choose your heater

Instant vs Storage Water Heater: Which Is Right for You?

Both types are common in Singapore homes. The right choice depends on how many people shower at once and what kind of shower you want.

Instant water heaterStorage water heater
How it worksHeats water as it flows throughHeats and stores water in a tank
Best forOne shower, small bathroomsSeveral outlets, rain showers, bathtubs
Space neededSmall wall unitWall or ceiling space for the tank
Hot water supplyUnlimited, but flow is limitedLarge volume, but tank can run out
Typical install priceS$160 – S$500S$350 – S$600
What we do

Water Heater Services We Provide

From a simple like-for-like swap to a full bathroom upgrade, we handle every part of the job.

New installation

Water heater installation for new homes and renovations, including pipework and power point.

Replacement

Old or faulty heaters removed and replaced with a new unit of your choice.

Instant to storage upgrade

Pipework and electrical changes so a storage tank can serve several outlets.

Repair

Leaks, tripping, no hot water and temperature problems diagnosed and fixed.

Electrical works

Dedicated circuit, heater switch and protection installed or upgraded.

Pipe repairs

Leaking hot and cold pipes and fittings around the heater repaired. See pipe leak repair.

Rheem storage water heater installed with PPR hot and cold water pipes during renovation
Storage water heater mounted and connected with PPR hot and cold supply lines.
Warning signs

Signs Your Water Heater Needs Repair or Replacement

Most water heaters give warnings before they fail completely.

  • No hot waterHeating element, thermostat or power supply fault.
  • Tripping the powerWater reaching the element or wiring is a safety issue. Switch off and call us.
  • Leaking tank or pipesDrips from the tank body usually mean internal corrosion and replacement.
  • Rusty or smelly waterCorrosion inside a storage tank, often in older units.
  • Water not hot enoughFaulty thermostat, element or an undersized heater for your needs.
  • Strange noisesPopping or rumbling from scale build-up inside the tank.
Safety

Why Water Heater Installation Needs an Electrician Too

Every water heater combines water and electricity in a wet room. Safe installation depends as much on the electrical work as the plumbing.

Electrical checks we make

  • Suitable circuit and cable size for the heater
  • Proper heater switch in a safe position
  • Residual current protection on the circuit
  • Earthing and connections tested before use

Plumbing checks we make

  • Correct cold inlet and hot outlet connections
  • Pressure relief and safety valves where required
  • Leak-free joints tested under pressure
  • Pipes supported and routed away from power points

If your heater keeps tripping the power, switch it off and do not use it until it has been checked.

Pricing

Water Heater Installation Singapore Cost Guide

Typical price ranges for the jobs we do most often. Your exact price is confirmed before work starts.

JobTypical price range (SGD)What changes the price
Instant water heater installationS$160 – S$500Unit supplied or not, new power point needed
Storage water heater installationS$350 – S$600Tank size, removal of old unit, piping changes
Water heater repairQuoted after diagnosisFault found, parts needed
New heater switch or circuitQuoted on requestDistance from the DB box, cable route
Water heater installation Singapore in an HDB bathroom by a PUB licensed plumber and EMA-licensed electrician
Plumbing and electrical work for a water heater, handled by one team.

We can supply the heater or install one you have bought.

How it works

Our Water Heater Installation Process

Most installations take two to four hours, depending on the heater type and any new pipework or wiring.

  1. Survey

    We check the bathroom, existing pipes and power supply, and confirm the right heater and position.

  2. Remove the old unit

    Power is isolated, the old heater drained and removed, and connections checked.

  3. Install and connect

    The new heater is mounted, piped, wired and protected according to its manual.

  4. Test and handover

    We test for leaks, check temperature and electrical safety, and show you how to use it.

Sizing

Choosing the Right Storage Tank Size

An undersized tank runs out of hot water; an oversized one wastes energy and space.

HouseholdTypical useSuggested approach
1–2 peopleShort showers, one bathroomInstant heater or small storage tank
3–4 peopleBack-to-back showersMedium storage tank
5+ peopleSeveral showers in the morningLarger tank or one heater per bathroom
Rain shower or bathtubHigh flow, large volumeStorage tank sized for the fixture

We confirm the size after asking how your household uses hot water.

Brands

Brands and Models We Install

We install most common water heater brands sold in Singapore, both instant and storage. If you have already bought a unit, send us the model so we can check the power and pipe requirements before the visit.

  • Check the power rating. Higher-rated heaters may need a bigger cable or a new circuit.
  • Check the mounting. Storage tanks need a strong wall or a proper ceiling bracket.
  • Look for safety marks. Electrical products sold in Singapore should carry the Safety Mark.
  • Keep the manual. Installation must follow the manufacturer’s instructions to keep the warranty valid.
Who we serve

Water Heater Installation for Every Home

We install heaters in all property types across Singapore.

HDB flats

Instant and storage heaters in common and master bathrooms, including like-for-like replacements.

Condominiums

Installations that follow MCST renovation rules and any work permit needed.

Landed homes

Multiple bathrooms, larger tanks and longer pipe runs.

Shops and offices

Pantry and shower heaters for commercial premises.

Why MM Engineering

Why Choose Us for Water Heater Installation in Singapore

MM Engineering Works is a 1st Class EMA-licensed electrical contractor with a PUB licensed plumber. Your heater’s plumbing and electrical work are done by one accountable team.

One team, one visit

No waiting for a separate electrician and plumber.

Safety first

Circuit, switch and protection checked on every installation.

Clear quotations

Scope and price confirmed before work starts.

How to check a PUB licensed plumber before booking water heater installation
A quick check to verify a PUB licensed plumber before anyone starts work.
Maintenance

How to Make Your Water Heater Last Longer

Simple care extends the life of any heater.

  • Set a sensible temperature. Lower settings reduce scale and energy use.
  • Switch off when away. Turn the heater off at the switch when travelling.
  • Check for drips. Look under the tank and at the pipe joints every few months.
  • Watch for tripping. Any tripping means it needs checking straight away.
  • Service older tanks. Storage tanks benefit from periodic checks of valves and the element.
  • Replace before failure. Old, corroded tanks can leak suddenly; plan a replacement.
Avoid these

Common Water Heater Installation Mistakes

These mistakes cause leaks, tripping and short heater life.

  • Wrong circuitConnecting a heater to an unsuitable circuit or socket.
  • No proper switchHeaters need a suitable switch that can isolate the supply safely.
  • Missing valvesSkipping safety or pressure valves required by the manufacturer.
  • Weak mountingStorage tanks are heavy when full and need strong fixings.
  • Pipes over power pointsLeaks can drip onto electrical fittings below.
  • No testingEvery installation should be leak-tested and electrically tested before use.
Which water heater installation and plumbing jobs need a PUB licensed plumber in Singapore
Which plumbing jobs need a licensed plumber and which a handyman can do.
Troubleshooting

Water Heater Not Working? Check These First

Before you book a repair, a few simple checks can save you a call-out. Only do what is safe, and never open the heater cover yourself.

  1. Check the switch

    Make sure the heater switch is on and the indicator light, if there is one, is lit. Some switches are outside the bathroom.

  2. Check the DB box

    See if a breaker or residual current device has tripped. If it trips again when reset, stop and call us.

  3. Check the water supply

    Make sure the inlet valve is open and other taps have normal pressure. No water flow means the heater cannot heat.

  4. Check the setting

    On instant heaters, check the temperature knob and flow. Too high a flow can make the water feel lukewarm.

Upgrades

Upgrading From an Instant to a Storage Water Heater

Many families upgrade when they add a rain shower or when two people need hot water at the same time. The upgrade involves more than swapping the unit.

New pipework

Hot water pipes may need to run from the tank to each outlet, sometimes through a false ceiling.

Mounting position

Storage tanks are heavy when full, so we check the wall or ceiling and use suitable brackets.

Electrical supply

A storage heater may need a different circuit, cable or switch from the old instant unit.

Mixer taps

Shower and basin mixers must suit a hot water supply from a tank.

Finishing

Pipes can be concealed in a false ceiling or neatly trunked where hacking is not possible.

Planning the visit

Most upgrades are done in one day with water and power off only for part of it.

Running costs

How to Reduce Your Water Heater Running Costs

Water heating is a noticeable part of a household electricity bill. These habits help keep it down without sacrificing comfort.

  • Shorter showers. Every minute less in the shower saves both water and the energy used to heat it.
  • Lower the thermostat. Many storage heaters are set hotter than needed. A lower setting still gives a comfortable shower.
  • Use a timer if available. Heat the tank only before the times your household showers.
  • Fix dripping hot taps. A dripping hot tap wastes heated water around the clock.
  • Choose an efficient model. When replacing, compare energy labels and choose a well-insulated tank.
  • Right size, not oversized. A tank that is too large heats water you never use.
Save time

What to Tell Us When You Book

Send these details on WhatsApp so we can recommend a heater and quote accurately.

About the bathroom

  • Photo of the wall where the heater will go
  • Photo of your current heater and its label
  • Number of showers or outlets to serve
  • Whether you have a rain shower or bathtub

About the electrics and access

  • Photo of the heater switch
  • Photo of your DB box, if easy to take
  • Property type and postal code
  • Any condo work permit or access rules
Safety

Water Heater Safety Tips for Your Home

A water heater is one of the few appliances that brings water and electricity together in a wet room. These simple rules help keep your family safe and protect the heater, the bathroom and the electrical system around it.

  • Never ignore trippingIf the heater trips the power, leave it off until a licensed electrician has checked it.
  • Keep the switch dryThe heater switch should be outside the shower area and never touched with wet hands.
  • Watch for scorch marksBrown marks or a burning smell near the switch or heater need urgent attention.
  • Do not cover the unitTowels or shelves over a heater can trap heat and moisture.
  • Check older heatersUnits that are many years old should be inspected, especially storage tanks.
  • Use licensed installersInstallation involves both water and electrical work, so use a team licensed for both.
On the day

What to Expect on Replacement Day

A planned replacement usually takes a few hours. Here is how the day typically goes, so you can plan around it.

  • Water and power off. The heater circuit and water supply to the bathroom are switched off for part of the job.
  • Old unit removed. We drain and remove the old heater and take it away.
  • New unit fitted. The new heater is mounted, piped and wired.
  • Hot water back. After testing, hot water is usually available again the same day.
FAQ

Water Heater Installation Singapore: Frequently Asked Questions

How much does water heater installation cost in Singapore?

Instant water heater installation typically costs S$160 to S$500. Storage water heater installation typically costs S$350 to S$600, depending on tank size, removal of the old unit and piping changes.

Should I choose an instant or storage water heater?

An instant heater is usually enough for one shower. Choose a storage heater for several outlets, rain showers or bathtubs.

Why does my water heater keep tripping the power?

Tripping usually means a fault in the element, wiring or a leak reaching electrical parts. Switch it off and have it checked before using it again.

Do I need a new power point for a water heater?

Often yes, especially when upgrading to a higher-rated heater or adding a heater where there was none. We check the circuit on site.

How long does water heater installation take?

Most installations take two to four hours. Upgrades that need new pipework or wiring can take longer.

Can you install a heater I bought myself?

Yes. Send us the model first so we can check the power and pipe requirements.

How long does a water heater last?

It depends on the model, water conditions and use. Replace a heater that leaks from the tank, rusts or keeps failing.

Can you repair a leaking water heater?

Leaks from fittings and valves can usually be repaired. Leaks from the tank body usually mean replacement.

Are you licensed for both plumbing and electrical work?

Yes. MM Engineering Works has a PUB licensed plumber and is a 1st Class EMA-licensed electrical contractor.

What are your working hours?

We work Monday to Saturday, 9am to 6pm. WhatsApp us a photo of your heater any time and we will reply during working hours.

Need a New Water Heater?

WhatsApp us a photo of your bathroom and current heater with your postal code. We will recommend the right unit and confirm the price.

MM Engineering Works Pte Ltd Β· 5 Lorong 4 Geylang, #04-01, Singapore 399264 Β· contact@mmengine.com Β· Mon–Sat 9am–6pm

Request A Call Back
Leave your details
Our specialist will contact you to arrange the date and time for your measurements.